Key WICRESET and Repair ink chip error of Epson PX-434A

By | January 25, 2022

WICRESET Software Epson PX-434A with Activation key and Manuals

Download free reset software Epson PX-434A, active instructions for key reset Epson PX-434A and how to use WICRESET software for Epson PX-434A to delete the waste ink counter of the Epson PX-434A printer.
– Some FREE WICRESET keys for Epson PX-434A printer: 3DE14D8A267Z23AD, 3C55DAF6DZ54C483, 3511D8Z8DZ2EZ82F, 322A2D656824DA42, 332A24ZEDEA1FC92.

Epson PX-434A service required

– How to reset the Epson PX-434A printer waste toner with the WICRESET program? Modern Epson printers are usually integrated the software or firmware for helping to record the number of photos and prints. When you reach a certain point, the display on the desktop or on LCD of the printer with the messages: “Inkpad of the printer is running out of use, please contact the support of Epson” or “Your printer needs to be maintained” or “The parts inside your printer can be deepened” or “service requirements” with flashing red lights and you are not allowed to do any work with the Epson PX-434A printer.
Epson PX-434A blinking red lights

Epson PX-434A blinking red lights

WIC Reset software for Epson PX-434A printer:

– Download WICRESET software to crack the Epson PX-434A printer counter for Windows:
– Download WICRESET software to crack the Epson PX-434A printer counter for Mac:

– Compatible printer: Epson PX-434A.
– Compatible OS: Reset program Epson PX-434A runs on Windows and Mac operating systems.
– Function: Delete waste toner for Epson PX-434A printer.
– Fix Epson PX-434A Maintenance Error: Service Required, A printer’s ink pad at the end of its service life Please contact Epson Support.
– Get the WIC key for Epson PX-434A printer automatically sends to your email at link: https://chiplessprinter.com/epson-px-434a-ink-pad-reset-utility.html
Epson PX-434A WICRESET Software is the third party software, specialized used to repair Epson PX-434A printer. This software stands out with the waste toner removal feature, extremely deep cleaning for the print head, adjusting the fineness of the print head, adjusting the motor header, overcoming extremely errors: printing ink, printed in color, blur color, horizontal stripes, vertical stripes, … In addition, this software also locks the chip on the cartridge that can be permanently printed without replacing the new ink cartridge, so which we can install the outer cartridge for printing, saving a lot of costs for that.
– After times using the Epson PX-434A printer, Epson PX-434A printer cannot be avoided with a memory overflow errors, the phenomenon on the printer will appear flashing errors with 2 red lights (paper lights and ink lights).Flashing at the same time or rotating leds blinking, and on a desktop display the message: “Service Required: A Printer Ink Pad is at the End of ITS Services Life. Please contact Epson Support“.
– If this is the correct error, let’s reset waste ink counter of Epson PX-434A printer to get the printer work normally.

Support to get the key to delete the ink counter for Epson PX-434A printer

buy/sell activation key to eraser inkpad counter of Epson PX-434A printer

– Repair the Epson PX-434A printer’s blinking red lights:
Epson PX-434A is blinking leds

– Repair Epson PX-434A Service Required error: “A printer’s ink pad at the end of its service life Please contact Epson Support”.
Epson PX-434A service required

– Check the current waste ink counter and check the inkchip of Epson PX-434A printer.
– Delete the Epson PX-434A printer counter.
– Fix Epson PX-434A printer Maintenance Error, reset Epson PX-434A printer chip.
– Unlock Epson PX-434A printer waste toner chip.
– Crack key WICRESET software Epson PX-434A printer.

How to delete printer ink counter of Epson PX-434A printer

– Read the waste ink counter of the Epson PX-434A printer:

Epson PX-434A service required

– When reading the Epson PX-434A printer’s counter went wrong:

I/O service could not perform operation

– We need to turn off the Epson Status Monitor, delete all the printing command, restart both the computer and Epson PX-434A printer and then you can go to read the Epson PX-434A printer counter.

– Steps to turn off Epson Status Monitor: https://chiplessprinter.com/how-to-disable-the-epson-status-monitor-utility.html

– If the printer’s counter exceeds 100%, we need to buy a key to reset the waste toner counter of the Epson PX-434A printer.

Epson PX-434A ink chip counter  in full 100% state

– Reset Epson PX-434A printer counter with WICRESET key:

Reset Epson PX-434A waste ink chip using WICRESET key

Reset Epson PX-434A waste ink chip using WICRESET key

Reset Epson PX-434A waste ink chip using WICRESET key

– After resetting the waste ink, then we re-read the Epson PX-434A printer waste toner

Successfully Reset waste ink counter Epson PX-434A by WICRESET key

Video tutorial deletes the Epson PX-434A printer counter with Key WICRESET

Free trial keys for reset Epson PX-434A printer

– If it is the first time using WICRESET software for the Epson PX-434A printer, you can use the free reset key to decrement the counter from 100% to 80% and then continue the printing process.

Epson PX-434A Free Trial keys
 

NOTE when cracking Epson PX-434A printer

– Delete all the printing commands are on the Epson PX-434A printer.
– Turn off the firewall and antivirus (if needed) of the desktop or laptop that the printer connected to, edit DNS to the DNS of Google: 8.8.8.8 and 8.8.4.4.

– WICRESET key for Epson PX-434A printer just can be use only 1 time, if you want to reset for the next times or reset another printer, you need to buy a new key.
– After cracking the Epson PX-434A printer, you need to restart the printer to complete the cracking process.

How to fix some common errors of Epson PX-434A printer

  • Code: 01
  • Display: A printer error has occurred. Turn off the printer and turn it on again. See your documentation.
  • Description: Fatal error (printer mechanism)
  • Causes: Mechanical trouble occurred.
  • Troubleshooting Guides: 1.Is the CR Motor cable properly connected to CN21 connector on the Main Board? 1.Connect the CR Motor cable correctly to CN21 connector on the Main Board. 2.Is the CR Motor cable damaged? 2.Replace the CR Motor with a new one. 3.Does the CR Motor operate normally? 3.Replace the CR Motor with a new one. 1.Is the CR Encoder damaged? 1.Replace the CR Encoder with a new one. 2.Is the FFC correctly connected to the connector on the CR Encoder? 2.Connect the Head FFC correctly. 1.Is the CR Scale properly centered in the slit of the CR Encoder? 1.Install the CR Scale correctly. 2.Is the CR Scale surface clean? 2.Wipe any dirt off the surface of the CR Scale. When the contamination is severe, replace the CR Scale with a new one. 3.Is the CR Scale damaged? 3.Replace the CR Scale with a new one. 4.Is the CR Scale correctly installed? 4.Install the CR Scale and the torsion spring correctly. 1.Is the Upper Paper Guide correctly installed? 1.Install the Upper Paper Guide correctly. 1.Is the Carriage Shaft free from dirt, and adequately lubricated? 1.Clean the Carriage Shaft and lubricate it as specified. 1.Is the CR Guide Plate free from dirt, and adequately lubricated? 1.Clean the CR Guide Plate and lubricate it as specified. 1.Is the Ink Tube correctly routed? 1.Route the Ink Tube correctly. 1.Is the Head FFC correctly routed? 1.Route the Head FFC correctly. 1.Is the Carriage path contaminated with foreign material (slip of paper)? 1.Remove any foreign material from Carriage path. 1.Is the CR Timing Belt correctly installed to Timing Driven Pulley Assy? 1.Install the Timing Driven Pulley Assy to CR Timing Belt correctly. 2.Is the CR Timing Belt correctly installed to the Pinion Gear of the CR Motor? 2.Install CR Timing Belt correctly. 1.Is tension of the CR Timing Belt appropriate? 1.Reassemble the CR Timing Belt and check the tension of the CR1.Is the PF Motor cable properly connected to CN22 connector on the Main Board? 1.Connect the PF Motor cable correctly to CN22 connector on the Main Board. Timing Belt again. If the tension is still not appropriate, replace the Printer Mechanism. 2.Is the PF Motor cable damaged? 2.Replace the PF Motor with a new one. 3.Does the PF Motor operate normally? 3.Replace the PF Motor with a new one. 1.Check if the firmware is the latest. 1.Update the firmware to the latest. 1.Check if the CR lock lever moves smoothly. 1.Replace the Ink System with a new one.
  • Code: 02
  • Display: It is likely that a paper jam has occurred in the printer. Turn off the printer, then open the scanner unit and remove the paper. See your documentation.
  • Description: Fatal error (paper jam)
  • Causes: Mechanical trouble occurred.
  • Troubleshooting Guides: 1.Is the CR Motor cable properly connected to CN21 connector on the Main Board? 1.Connect the CR Motor cable correctly to CN21 connector on the Main Board. 2.Is the CR Motor cable damaged? 2.Replace the CR Motor with a new one. 3.Does the CR Motor operate normally? 3.Replace the CR Motor with a new one. 1.Is the CR Encoder damaged? 1.Replace the CR Encoder with a new one. 2.Is the FFC correctly connected to the connector on the CR Encoder? 2.Connect the Head FFC correctly. 1.Is the CR Scale properly centered in the slit of the CR Encoder? 1.Install the CR Scale correctly. 2.Is the CR Scale surface clean? 2.Wipe any dirt off the surface of the CR Scale. When the contamination is severe, replace the CR Scale with a new one. 3.Is the CR Scale damaged? 3.Replace the CR Scale with a new one. 4.Is the CR Scale correctly installed? 4.Install the CR Scale and the torsion spring correctly. 1.Is the Upper Paper Guide correctly installed? 1.Install the Upper Paper Guide correctly. 1.Is the Carriage Shaft free from dirt, and adequately lubricated? 1.Clean the Carriage Shaft and lubricate it as specified. 1.Is the CR Guide Plate free from dirt, and adequately lubricated? 1.Clean the CR Guide Plate and lubricate it as specified. 1.Is the Ink Tube correctly routed? 1.Route the Ink Tube correctly. 1.Is the Head FFC correctly routed? 1.Route the Head FFC correctly. 1.Is the Carriage path contaminated with foreign material (slip of paper)? 1.Remove any foreign material from Carriage path. 1.Is the CR Timing Belt correctly installed to Timing Driven Pulley Assy? 1.Install the Timing Driven Pulley Assy to CR Timing Belt correctly. 2.Is the CR Timing Belt correctly installed to the Pinion Gear of the CR Motor? 2.Install CR Timing Belt correctly. 1.Is tension of the CR Timing Belt appropriate? 1.Reassemble the CR Timing Belt and check the tension of the CR1.Is the PF Motor cable properly connected to CN22 connector on the Main Board? 1.Connect the PF Motor cable correctly to CN22 connector on the Main Board. Timing Belt again. If the tension is still not appropriate, replace the Printer Mechanism. 2.Is the PF Motor cable damaged? 2.Replace the PF Motor with a new one. 3.Does the PF Motor operate normally? 3.Replace the PF Motor with a new one. 1.Check if the firmware is the latest. 1.Update the firmware to the latest. 1.Check if the CR lock lever moves smoothly. 1.Replace the Ink System with a new one.

mua bán key xóa mực máy in Epson PX-434A

Contact to get WICRESET Key for Epson PX-434A printer

Website: https://nguyendangnam.com/
Telegram: https://t.me/hyperaktiv
Facebook: https://www.facebook.com/dngnm/
Source:
https://chiplessprinter.com/epson-px-434a-ink-pad-reset-utility.html
https://vn.chiplessprinter.com/key-wic-epson-px-434a-xoa-loi-muc-may-in-epson-px-434a/
https://nguyendangnam.com/epson-px-434a-wic-key-reset-waste-inkpad-quick-guide.html
https://shop.nguyendangnam.com/product/epson-px-434a-adjustment-program/

Leave a Reply

Your email address will not be published. Required fields are marked *